Test and Measurement / Analysis Products

  1. InGaAs Camera-Based Beam Profiling Systems For Eye-Safe Military, Telecom, And Medical Laser Applications
    7/31/2019

    The Ophir® SP1201 and SP1203 are compact, InGaAs camera-based beam profiling systems designed specifically for real-time viewing and measuring of the optical performance of laser beams. The SP1201 features a QVGA resolution InGaAs camera, and the SP1203 features a high-resolution VGA InGaAs camera, both for high sensitivity imaging.

  2. High Resolution Beam Profiling Camera With USB 3.0 Interface For CW And Pulsed Lasers: Ophir® SP920
    7/30/2019

    The Ophir® SP920 USB 3.0 Silicon CCD High Resolution Beam Profiling Camera is designed to accurately capture and analyze wavelengths from 190 nm – 1100 nm, with enhanced sensitivity at 1070 nm. The camera features a wide dynamic range, excellent signal to noise ratio, USB 3.0 interface, and BeamGage® beam analysis software. It is ideal for measuring CW and pulsed laser profiles in such high-speed applications as medical imaging, microscopy, or micromachining.

  3. Ophir FluxGage System For Measurement Of LED Luminaires With Low Total Luminous Flux
    7/30/2019

    Measurements include total luminous flux (down to 20 lm), spectrum and color parameters (CCT, CRI, TM-30-15), and flicker for a variety of applications, including automotive, traffic lighting, life sciences, and medical.

  4. Ruggedized Multi-Head High-Speed Camera System: FASTCAM MH6
    4/26/2019

    Photron offers the new FASTCAM MH6 camera system perfectly designed for space- and weight-constrained environments, including in on-board vehicle safety testing and military testing applications. The MH6 camera head provides outstanding image quality with 1080 HD resolution at 1,000 frame per second and light sensitivity of ISO 5,000 color and ISO 12,500 monochrome.

  5. Active Thermography Solutions: TESTD Series
    4/24/2019

    Telops’ TESTD Series offers nondestructive testing solutions for the evaluation of materials, components, and assemblies. These non-contact IR methods are based on active thermography to detect damage from corrosion, delamination, decay, voids, inclusions, and other irregularities.

  6. Production Ready 3D Optical Profiler: ZeGage™ Pro
    1/4/2019

    The ZeGage™ Pro and ZeGage™ Pro HR are scanning white light interferometers that provide 3D optical surface profiling for the measurement of precision surfaces that require non-contact metrology. The base ZeGage™ Pro model delivers surface mapping at the nanometer scale, meeting the needs for most industrial surfaces. For smoother samples with a much finer surface finish, the ZeGage™ Pro HR offers more than 20X higher precision with 0.15 nm vertical precision.

  7. Compact, All-In-One LED Luminaire Measurement System: FluxGage
    9/11/2018

    The FluxGage is Ophir’s new compact measuring system for LED Luminaires that measures their total flux, color (CCT, CRI, Duv, chromaticity), and flicker. The system measures the total flux using solar panels instead of an integrating sphere, delivering the same functionality in one-third the size. 

  8. Ophir® Power Meter For Fluorescence Microscopy: PD300-MS
    5/29/2018

    The new Ophir® PD300-MS microscope slide power meter designed to make accurate measurements of emitted light from fluorescent microscopes. Measuring power levels of high numerical aperture (NA) objectives, from 5 µW to 1 W, this power meter can be used with a wide range of light sources in such applications as photo-activation or photo-bleaching.

  9. HD Dual-Sensor Thermal Camera For Drones: FLIR Duo Pro R
    3/21/2018

    FLIR offers the Duo Pro R high-resolution thermal and visible light imager specifically designed for commercial, industrial, and public safety applications. This HD camera features a dual-sensor with high-definition 4K color and thermal video recording in a single package. 

  10. 3D Optical Surface Profilers: Nexview NX2
    3/19/2018

    Zygo Corporation introduces the next generation of optical profiling instruments designed to precisely measure surface area topography quickly and with ease for enhanced productivity and versatility. The Nexview NX2 instrument is based on innovative and versatile non-contact optical technologies. Ideal applications include research, precision engineering, quality control, and advanced manufacturing.