The Ophir® L2000W-PF-120 is a water-cooled Laser Power/Energy Sensor designed for measuring large pulsed lasers. This thermal sensor measures powers from 1 W to 200 W and energies form 6 J to 6000 J over the spectral range of 0.3 µm to 2.2 µm. The sensor features a large 120 m aperture to accommodate for high energy densities and short pulses.
The Ophir® SP1201 and SP1203 are compact, InGaAs camera-based beam profiling systems designed specifically for real-time viewing and measuring of the optical performance of laser beams. The SP1201 features a QVGA resolution InGaAs camera, and the SP1203 features a high-resolution VGA InGaAs camera, both for high sensitivity imaging.
The Ophir® StarLab 3.40 is an easy-to-use laser power/energy measurement software that supports a wide range of new functions, including pulsed power and low frequency measurements. It is also designed to support the newest Ophir laser meters, including the Centauti, and Juno+.
The Juno+ is a smart, compact USB module and interface designed to turn a laptop or PC into a full laser power/energy meter. The module connects any of the 100+ Ophir smart laser sensors to a PC USB port. The Juno+ operates with StarLab software to log power and energy, as well as calculate and display averages, statistics, and histograms.
The Ophir® SP920 USB 3.0 Silicon CCD High Resolution Beam Profiling Camera is designed to accurately capture and analyze wavelengths from 190 nm – 1100 nm, with enhanced sensitivity at 1070 nm. The camera features a wide dynamic range, excellent signal to noise ratio, USB 3.0 interface, and BeamGage® beam analysis software. It is ideal for measuring CW and pulsed laser profiles in such high-speed applications as medical imaging, microscopy, or micromachining.
Measurements include total luminous flux (down to 20 lm), spectrum and color parameters (CCT, CRI, TM-30-15), and flicker for a variety of applications, including automotive, traffic lighting, life sciences, and medical.
The FluxGage is Ophir’s new compact measuring system for LED Luminaires that measures their total flux, color (CCT, CRI, Duv, chromaticity), and flicker. The system measures the total flux using solar panels instead of an integrating sphere, delivering the same functionality in one-third the size.
The new Ophir® SP920G GigE Silicon CCD High Resolution Camera is designed to capture and analyze wavelengths from 190 nm - 110 nm for industrial laser beam profiling applications. With a compact design, wide dynamic range, excellent signal to noise ratio, and a high-speed GigE (Gigabit Ethernet) interface, the camera is ideal for measuring CW and pulsed laser profiles in applications such as laser cutting of medical devices or the welding of dissimilar materials.
The new Ophir® PD300-MS microscope slide power meter designed to make accurate measurements of emitted light from fluorescent microscopes. Measuring power levels of high numerical aperture (NA) objectives, from 5 µW to 1 W, this power meter can be used with a wide range of light sources in such applications as photo-activation or photo-bleaching.
The Ophir® Centauri is a compact, portable laser power and energy meter designed to make precise measurements of laser performance over time. This meter features a large, full-color, seven-inch touch screen for the review of visual data using a wide range of graphical display formats. The Centauri also offers advanced math functions, including density, scale factory, and normalize against baseline.