Christian Dini from Ophir Photonics introduces the updated version of their beam profiling and beam propagation measurement system.
In this video, John McCauley from Ophir Photonics walks through a brief tutorial on beam propagation analysis for high powered lasers with the BeamWatch system.
At the Laser Components booth at Photonics West 2019, Julian Carey of SLD Laser introduces LaserLight, the first commercial solid-state, highly directional laser white light source with a luminance up to 100X better than LED luminaire devices.
This year at Photonics West, Dan Ford with the Ophir Photonics Group talked to us about the importance of achieving laser consistency.
Jeff Briton and Dragan Grubsic discuss some of the challenges involved in operating pulsed laser diodes and avalanche photodiodes in LIDAR for the automotive and sensor markets.
In this video, Jimmy Green, an OEM Specialist, shares how Ophir Photonics assisted a lasik surgery company replace a plastic mode burn pre-test with an accurate laser measurement device.
This video describes how laser beam profiling with Ophir Photonics’ BeamGage showed why two different lasers running at the same power output produced different results.
In this video, Jimmy Green, an Ophir Photonics OEM Specialist, discusses an OEM solution provided to a customer that allowed for medical laser power development before and after procedures that ensured the proper outcomes.
In this video, Dick Reiley from Ophir Photonics shares how he provided a manufacturer a solution that allowed throughput to increase 4X by reducing the time required for quality inspection. This solution was specifically created for an application measuring laser diodes.
Eric Craven with Ophir Photonics provided us with a tutorial at DCS 2016 on how to co-align visible, near-infrared, and infrared laser beams through the use of a pyroelectric camera array coupled with beam profiling software.
|
|
|
|
|
|