PhotonicsProducts

  1. Satcom Optical Filters And Coatings
    9/5/2019

    Iridian offers over 20 years of experience in producing industry leading optical telecommunication and datacom filters for terrestrial systems. Commercial satcom networks will consist of constellations of 100’s to 1000’s of satellites in an interconnected low earth orbit (LEO) mesh. Many of these systems rely on an optical intersatellite link (OISL) architecture to connect satellites via laser based optical communications. Optical filters provide wavelength selectivity to these systems addressing different functional needs from solar rejection windows to beam steering wavelength selective dichroic filters.

  2. sCMOS Camera With Streaming via 10G FOL: pco.edge 5.5 (10G FOL)
    8/30/2019

    The pco.edge 5.5 sCMOS camera operates with streaming via a 10G FOL (Camera Link HS). It allows for direct processing of large data transfers on a computer. This high-performance data interface makes it easy to securely bridge distances of more than 10 km.

  3. sCMOS Camera With Streaming via 10G FOL: pco.edge 4.2 (10G FOL)
    8/30/2019

    The pco.edge 4.2 sCMOS camera operates with streaming via a 10G FOL (Camera Link HS). It allows for direct processing of large data transfers on a computer. This high-performance data interface makes it easy to securely bridge distances of more than 10 km.

  4. Compact Back Illuminated sCMOS Camera In UV: pco.edge 4.2 bi UV
    8/30/2019

    The pco.edge 4.2 bi UV is a compact, cooled, back illuminated sCMOS camera designed to work inside the ultraviolet (UV) wavelengths. A specialized input window inside the camera achieves high QE within the UV range. Based on the compact pco.edge series with back illuminated sensor technology, this camera is perfect for demanding lighting conditions, even without active cooling.

  5. Compact Back Illuminated sCMOS Camera In UV: pco.panda 4.2 bi UV
    8/30/2019

    The pco.panda 4.2 bi UV is a compact, back illuminated sCMOS camera designed to work inside the ultraviolet (UV) wavelengths. A specialized input window inside the camera achieves high QE within the UV range. Based on the compact pco.panda series with back illuminated sensor technology, this camera is perfect for demanding lighting conditions, even without active cooling.

  6. InGaAs Camera-Based Beam Profiling Systems For Eye-Safe Military, Telecom, And Medical Laser Applications
    7/31/2019

    The Ophir® SP1201 and SP1203 are compact, InGaAs camera-based beam profiling systems designed specifically for real-time viewing and measuring of the optical performance of laser beams. The SP1201 features a QVGA resolution InGaAs camera, and the SP1203 features a high-resolution VGA InGaAs camera, both for high sensitivity imaging.

  7. Advanced Laser Power/Energy Measurement Software: Ophir® StarLab 3.40
    7/31/2019

    The Ophir® StarLab 3.40 is an easy-to-use laser power/energy measurement software that supports a wide range of new functions, including pulsed power and low frequency measurements. It is also designed to support the newest Ophir laser meters, including the Centauti, and Juno+.

  8. Compact USB Module That Turns PC Into Laser Power/Energy Meter: Juno+
    7/31/2019

    The Juno+ is a smart, compact USB module and interface designed to turn a laptop or PC into a full laser power/energy meter. The module connects any of the 100+ Ophir smart laser sensors to a PC USB port. The Juno+ operates with StarLab software to log power and energy, as well as calculate and display averages, statistics, and histograms.

  9. High Resolution Beam Profiling Camera With USB 3.0 Interface For CW And Pulsed Lasers: Ophir® SP920
    7/30/2019

    The Ophir® SP920 USB 3.0 Silicon CCD High Resolution Beam Profiling Camera is designed to accurately capture and analyze wavelengths from 190 nm – 1100 nm, with enhanced sensitivity at 1070 nm. The camera features a wide dynamic range, excellent signal to noise ratio, USB 3.0 interface, and BeamGage® beam analysis software. It is ideal for measuring CW and pulsed laser profiles in such high-speed applications as medical imaging, microscopy, or micromachining.

  10. Ophir FluxGage System For Measurement Of LED Luminaires With Low Total Luminous Flux
    7/30/2019

    Measurements include total luminous flux (down to 20 lm), spectrum and color parameters (CCT, CRI, TM-30-15), and flicker for a variety of applications, including automotive, traffic lighting, life sciences, and medical.